Welcome at WATERJET - CUTTING - SYSTEMS WaterJet Cutting- The innovative cutting technique for modern materials
The Stein-Moser Waterjet is ideal for short-run part production, just-in-time manufacturing, tooling, and prototype part development. It requires no tool changes or complex fixturing, so you can reduce setup times by at least 50%. And the smooth finish it leaves behind often eliminates the need for secondary machining. As a result, the Stein-Moser Waterjet can dramatically increase your profitability.
Rapid setup, no tool changes are required
No noxious gases, liquids, or oils are used in (or caused by) the machining process
The work piece is neither thermally influenced nor vibrated by the water-jet
Does not create heat affected zones or mechanical stresses
We will consult you personally to provide you the the ideal WaterJet - Cutting machine according to your requirements!
NEWS
STM WATERJET CONFIGURATOR
Welcome the configurator of your interactive customized STM waterjet cutting solution.
You are invited to inform yourself in details about the STM modular waterjet System and its components. A modern concept and efficient design characterize a reliable system that fulfils the latest shape cutting requirements.
By moving the mouse over one of the components on the picture, you can retrieve all single relevant details. Also the horizontal bar at the top of the picture can be used to navigate through the single components.
Please don't hesitate to contact the STM team for any further questions or information.
Not less than 20,000 fans attended the finals of the 58th Jack Wolfskin Four Hills Tournament on 6 January 2010 in Bischofshofen.
STM was represented with 120 guests in the VIP area of the Sepp-Bradl Stadium. We, the team of STM, would like to thank our guests for joining us and also for the many positive responses
on this event!
Beginning of December the 9th BLECHexpo in Stuttgart opened its doors and received, with 956 exhibitors from 30 countries a very strong international feedback. During the four days of the fair a little over 25,000 trade visitors visited the 6 fully booked exhibition halls.
STM exhibited once again with his German system-partner Maximator JET. All in all BLECHexpo was a great success! This time also our Russian and French distributors were present on the exhibition.
We would like to thank the many visitors for joining us!
The Essen Welding Fair Exceeds the Expectations of the Exhibitors - Distinct Growth Stimuli for the Economic and Technical Fields
A Quantum Leap with Regard to Internationality:
Guests Came from 128 Countries
60,000 Experts at the Leading Fair in the Joining Sector
Anywhere in the World
In spite of the globally difficult economic outline conditions, the 17th International Essen Welding Fair was able to maintain the high level of the last fair (in 2005) and thus to once again achieve one of the best results in its history. To equal extents, the exhibitors and the organisers registered a fair success which considerably exceeded their expectations. Six days' long on an exhibition area of 100,000 m2 at Messe Essen, 1,015 exhibitors from 42 countries showed the most comprehensive range on offer since the premiere of the fair in 1952.
The STM Team would like to thank you for your visit!
Mach Tool, Poznan, Poland 2009 from 16.06. - 19.06.2009 - International Machine Tools Exhibition
This year STM exhibited together with its local partner in Poland ABH BIURO TECHNICZNE from Warsaw (http://www.abh.com.pl).
The Mach-Tool as an international trade fair for machine tools is one of the largest exhibitions in Europe. On this international trade fair exhibitors presenting the latest technologies, materials and application areas of the industry. The Mach-Tool is thus important meeting place and information platform.
We would like to thank all the visitors for coming to meet us and our Russian partners RusEuroTech for their great support!
Stone+tec Nuremberg 2009:
Cloudy, but mainly bright
The mood at Stone+tec Nürnberg 2009, the 16th International Trade Fair Natural Stone and Stoneprocessing Technology held in the Exhibition Centre Nuremberg from 20-23 May, largely corresponded to the early summer weather outside the halls: cloudy, but mainly bright. Some 34,000 trade visitors used the four days of the exhibition to source information about the latest range of international products and services in the exhibition segments of natural stone, technology, and gravestones and accessories.
Here you see our exhibition booth in a 3D view! CLick on fullscreen to enlarge the picture. YOu can move the picture with your mouse.
Highlights Welding & Cutting Moscow 2009
From 12th to 15th May 2009 the third exhibition "Welding & Cutting Russia" took place in Moscow. The welding & cutting tradefair itself is the most important industry event of the welding trade. Only on this leading tradefair the global market, global know-how, the decision makers from companies and leading minds from science meet. We participated with a waterjet cutting system of the latest generation. Although the show itself occupied only a small part of the exhibition grounds, there was a huge stampede of visitors.
We would like to thank all the visitors for coming to meet us and our Russian partners RusEuroTech for their great support!
Your team of Maximator JET and Stein-Moser
GOOD FROM EXPERIENCE
With more than 20 years of tradition, STM is amongst the very first waterjet cutting pioneers
At STM GmbH, waterjet cutting means both systems and tradition.
23 years ago, the Austrian company began series production of its own systems. Right from the start, the aim of the company was to offer its customers bespoke manufacturing solutions with series production quality and first class service. With success: today, STM is one of the world's leading waterjet cutting specialists. With an attractive price-performance ratio, great ease of use as well as high wear resistance, ease of maintenance and efficiency, the compact portal systems mean even small and medium sized companies can make use of this rapidly growing tool technology. But not only that: thanks to intensive research in cooperation with well known institutions, STM guarantees continuity, not only from an organisational point of view but also from a technological point of view. In addition, a mature network of suppliers and sales partners ensures we profit from close and trouble-free cooperation.
COST CUTTING CUBED
With a unique CAD/CAM solution, STM is significantly expanding the range-of- use spectrum for 3D waterjet cutting
Three-dimensional cutting processes using waterjet cutting technology have until now demonstrated only limited success. Especially using abrasive cutting processes, the CAD/CAM connection was less efficient that a robot solution, but this has now changed: The Austrian waterjet specialist STM has hit upon this niche for itself and has, together with a German system partner, Maximator JET GmbH, developed an application, which for the first time is making smooth and above all parallel 2D and 3D water jet cutting with and without abrasive possible. Hence the system combines the performance capabilities of 3D robots with the economy of waterjet technology. Users also profit from the flexibility of this technology, which makes possible both parallel manufacturing processes and "on the fly" material changeovers. Consequently this innovation is of general interest to the processing industry. Especially non-standard, complex cutting processes can thus be designed so that they are quicker, generate less waste and provide clear cost-savings while maintaining the same quality level.
EFFICIENCY CLASS A FOR STM WATERJET CUTTING SYSTEMS
Waterjet cutting is ecological, economic and practical - one of the most future-proof manufacturing solutions
At no point in time are production processes more under the microscope than in times of crisis. Equally of concern are possible savings, efficiency increases and, often state-aided, ecological aspects. That’s three reasons why water cutting technology is booming worldwide and across different industries. Because water cutting technology saves energy, material, time and your nerves. High time for decision makers to pay more attention to this technology, its opportunities for use and its commercial advantages. This applies for nearly all industries, but especially for those processing steel and stainless steel, aluminium, non-ferrous metal plastic, stone and marble. These are also the core markets of the Austrian water cutting technology specialist, STM. The company impressively demonstrates with its standard quality products, how resource saving and universal this cold cutting process is.
On Thursday the 15th january during the 24th "Education Week of Bavarian & Austrian master stonemasons 2009" STM invited all the participants of the event to a waterjet cutting demonstration at the production site in Bischofshofen. Afterwards a traditional cottage evening with meat dumplings and traditional music was organised on the "Mosott Alm". The STM team would like to thank again all guests for coming!
"Easier maintenance by the newly developed abrasive dosing head!"
The new type of abrasive dosing head saves valuable time at the maintenance. An optimized constructive solution simplifies both the general handling as well as the maintenance.
Juergen Moser, managing director of STM Waterjet Solutions, explains: "The abrasive dosing head in its previous design worked good, although cleaning and maintenance e.g. after a water splash back were difficult."
A water splash back can occur when the jet focus sets on the Workpiece. During a water splash back water runs up the abrasive hose into the funnel towards the glass case.
The new constructive solution of the abrasive dosing head, a compact unit, makes the maintenance much easier for the customers. To get to the parts to maintain no covers have to be taken off any more. The funnel under the dosing unit is composed of a simple sliding mechanism that can be taken out simply. Stoppage in the abrasive dosing head can be removed quickly and easily.
Also, the venting of the glass case of the abrasive dosing head has been completely redesigned. The upper cap presents a specially developed venting profile in order to avoid building up pressure in the inside of the glass case.
The focus on the customers needs and a continuing technical development, as in the actual case of the redesigned abrasive dosing head, lead to gradual optimisation of technical solutions of machine components.
For Jürgen Moser is important, "to always continue developing and improving, and to be leader in offering very good quality of the standard components as well as of the service offered to the customer."
"EuroBLECH”
Together with our German distributor and with a completely redesigned booth we were represented at the EuroBLECH 2008.
With 69.400 trade visitors the fair was also for us a great success! Especially the presentation of our newly developed abrasive dosing unit attracted great interest among the visitors.
STM VIP invitation to the final of the Four Hills Tournament in Bischofshofen 2010
In january 2010 STM will invite its customers and partners to the finals of the prestigious Four Hills Tournament in Bischofshofen!
Waterjet cutting systems for the future
A brand new generation of STM Waterjet Systems has been developed to meet the specific needs of our clients and their special cutting applications. A modern concept and efficient design characterize a reliable system that fulfils the latest shape cutting requirements.
STM Waterjet Systems offer our clients flexible, high-performance and tailor-made cutting solutions for any material and desired shape.
Powered by a HYTRON High Pressure pump from Böhler/ Austria with a maximum pressure of 400 MPa, STM Waterjet Systems find their daily, efficient application in cutting various materials up to a thickness of 100mm, including:
• industrial gaskets, plastic materials, rubber
• foam materials
• stainless steel, aluminum, copper, titanium
• carbon fiber reinforced plastic, carbon fiber, composite materials
• granite, marble, glass, ceramics
The key benefits are that this waterjet cut does NOT cause any thermal stress and does NOT set free any toxic dust and/or vapor. The only tool we are using is pure water or – in abrasive mode – water and garnet sand. That’s it! -> Download Imagefolder STM Waterjet
WATERJET - CUTTING - SYSTEMS
The Stein-Moser Waterjet is ideal for short-run part production, just-in-time manufacturing, tooling, and prototype part development. It requires no tool changes or complex fixturing, so you can reduce setup times by at least 50%. And the smooth finish it leaves behind often eliminates the need for secondary machining. As a result, the Stein-Moser Waterjet can dramatically increase your profitability.
